P-BOND Composite Adhesive    Type SK  50 ml 

P-BOND Type SK has a short pot life and cures in approx. 10 min (20°C / 68ºF). Consistency: paste-like.

P-BOND is a new type of 2-component adhesive and is highly recommended where strong and durable elastic bonding is required. P-BOND is free of solvents and has excellent adhesion to various kinds of surfaces.

The 50 ml  are delivered in a twin cartridges. A graduated mixing nozzle serves to combine both P-Bond components during the application. Since the mixing nozzle will not completely clear upon use, it is recommend that you order replacement nozzles for future applications.

The twin cartridge can be used with most 50 ml sized caulking guns. In addition an adapter can be ordered that facilitates the use of the more common 310 ml caulking gun.  

For small area projects  we recommend the P-Bond kit containing one replacement nozzle and one adapter. 

Consumption: 

As per demand. 

Contents: 50  ml twin cartridge

Art. No:  NCP100

 P-BOND Composite Adhesive     Type SK    50 ml  Kit                                                     

P-BOND Type SK has a short pot life and cures in approx. 10 min (@ 20°C / 68ºF). Consistency: paste-like.

P-BOND is a new type of 2-component adhesive and is highly recommended where strong and durable elastic bonding is required. P-BOND is free of solvents and has excellent adhesion to various kinds of surfaces.

This kit is recommended for multiple small area projects. The 50 ml  quantity of P-BOND is delivered in twin cartridges. A graduated mixing nozzle serves to mix the appropriate amount of both P-BOND components during the application. As the mixing nozzle will tend not to completely clear after use, this set contains two nozzles. It is recommend you order additional replacement nozzles for future use.

The twin cartridge can be used with most 50 ml sized caulking guns. In addition, an adapter is included in this kit that facilitates the use of the more common 310 ml caulking gun.

Consumption: 

As per demand 

Contents:  50  ml twin cartridge

                     2 graduated mixing nozzles

                     1 adapter

Art. No:  NCP090

 P-BOND Composite Adhesive    Type SK    150 ml 

P-BOND Type SK has a short pot life and cures in approx. 10 min (@ 20°C / 68ºF). Consistency: paste-like.

P-BOND is a new type of 2-component adhesive and is highly recommended where strong and durable elastic bonding is required. P-BOND is free of solvents and has excellent adhesion to various kinds of surfaces.

The 150 ml quantity of P-BOND is delivered in an integrated twin cartridge configuration.  The second cartridge is packaged inside the outer cartridge.  A long graduated mixing nozzle serves to mix the appropriate amount of both P-BOND components during the application. Since the mixing nozzle will not completely clear upon use, it is recommend that you order replacement nozzles for future applications.

The 150 ml twin cartridge is delivered with an adapter to facilitate use with the more common 310 ml caulking guns.

For small area projects we recommend the 150ml P-Bond kit containing one replacement nozzle and one adapter. 

Consumption:

As per demand.

Contents: 150  ml twin cartridge

                  1 Adapter

Art. No:  NCP170

 P-BOND Composite Adhesive      Type SK    150 ml  Kit  

P-BOND Type SK has a short pot life and cures in approx. 10 min (@ 20°C / 68ºF). Consistency: paste-like.

P-BOND is a new type of 2-component adhesive and is highly recommended where strong and durable elastic bonding is required. P-BOND is free of solvents and has excellent adhesion to various kinds of surfaces.

This kit is recommended for multiple small area projects. The 150 ml  quantity of P-BOND is delivered in twin cartridges. A graduated mixing nozzle serves to mix the appropriate amount of both P-BOND components during the application. As the mixing nozzle will tend not to completely clear after use, this set contains two nozzles. It is recommend you order additional replacement nozzles for future use.

The 150 ml twin cartridge is delivered with an adapter to facilitate the use of the more common 310 ml caulking guns.

Consumption: 

As per demand.

Contents: 50  ml twin cartridge

                     2 graduated mixing nozzles

                     1 adapter

Art. No:  NCP140

 P-BOND Composite Adhesive       Type SK                      450 ml 

P-BOND Type SK has a short pot life and cures in approx. 10 min (@ 20°C / 68ºF). Consistency: paste-like.

P-BOND is a new type of 2-component adhesive and is highly recommended where strong and durable elastic bonding is required. P-BOND is free of solvents and has excellent adhesion to various kinds of surfaces.

The 450 ml container is for heavy duty industrial use and requires a compressed air gun for application. The 450 ml quantity is delivered in a twin cartridge package.  A graduated mixing nozzle serves to mix the appropriate amount of both P-BOND components during the application. Since the mixing nozzle will not completely clear upon use, it is recommend that you order replacement nozzles for future applications.

Consumption: 

As per demand.

Contents: 450  ml twin cartridge

Art. No:  NCP070

 P-BOND Composite Adhesive    Type FL         750 ml 

P-BOND Type FL has a longer pot life and cures in approx. 1 hour (@ 20°C / 68ºF).  Consistency: thixotropic; self levelling.

P-BOND is a new type of 2-component adhesive and is highly recommended where strong and durable elastic bonding is required. P-BOND is free of solvents and has excellent adhesion to various kinds of surfaces.

The 750 ml quantity is delivered in a combined package containing both components. P-BOND delivered in these sizes is used primarily for large area surfaces. The longer curing time of P-BOND Type FL facilitates these large area surface applications.

Consumption approximately: 

Consumption depends on the thickness of the applied layer and on the texture of the surface. For smooth even surfaces and when applied with a fine to medium serrated spatula:

0.75 to 1.00 litre per square meter

or 25.36 to 33.81 fluid ounces per 10.76 square feet.

Contents: 750  ml combined pack

Art. No:  NCP020

 P-BOND Composite Adhesive Type FL                      1.5 Liter 

P-BOND Type FL has a longer pot life and cures in approx. 1 hour (@ 20°C / 68ºF). Consistency: thixotropic; self levelling.

P-BOND is a new type of 2-component adhesive and is highly recommended where strong and durable elastic bonding is required. P-BOND is free of solvents and has excellent adhesion to various kinds of surfaces.

The 1.5 liters quantity is delivered in a combined package containing both components. P-BOND delivered in these sizes is used primarily for very large area surfaces. The longer curing time of P-BOND Type FL facilitates these very large area surface applications.

Consumption approximately: 

Consumption depends on the thickness of the applied layer and on the texture of the surface. For smooth even surfaces and when applied with a fine to medium serrated spatula:

0.75 to 1.00 litre per square meter

or 25.36 to 33.81 fluid ounces per 10.76 square feet.

Contents: 1.5 Liter combined pack

Art. No:  NCP010

 P-BOND Composite Adhesive       Type FL     3 Liter 

P-BOND Type FL has a longer pot life and cures in approx. 1 hour (@ 20°C / 68ºF). Consistency: thixotropic; self levelling.

P-BOND is a new type of 2-component adhesive and is highly recommended where strong and durable elastic bonding is required. P-BOND is free of solvents and has excellent adhesion to various kinds of surfaces.

The 3 liter quantity is delivered in a combined package containing both components. P-BOND delivered in these sizes is used primarily for very large area surfaces. The longer curing time of P-BOND Type FL facilitates these very large area surface applications.

Consumption approximately: 

Consumption depends on the thickness of the applied layer and on the texture of the surface. For smooth, even surfaces and when applied with a fine to medium serrated spatula:

0.75 to 1.00 litre per square meter.

or 25.36 to 33.81 fluid ounces per 10.76 square feet.

Contents: 3 Liter combined pack

Art No:  NCP030

 WKT PRIMER   P1                 1 Liter

P-BOND Type FL has a longer pot life and cures in approx. 1 hour (@ 20°C / 68ºF). Consistency: thixotropic; self levelling.

P-BOND is a new type of 2-component adhesive and is highly recommended where strong and durable elastic bonding is required. P-BOND is free of solvents and has excellent adhesion to various kinds of surfaces.

The 15 liter quantity is delivered in pails containing both components. Deliveries in pails are used for large scale high volume industrial applications. The longer cure time of P-BOND Type FL facilitates the use on extremely large surface areas.

Consumption approximately: 

Consumption depends on the applied thickness of the layer and on the texture of the surface. For smooth, even surfaces and when applied with a fine to medium serrated spatula:

0.75 to 1.00 litre per square meter.

or 25.36 to 33.81 fluid ounces per 10.76 square feet.

Contents: 15 Liter combined pack

Art. No:  NCP050

 P-BOND Composite Adhesive       Type FS 2        1.5 Liter 

P-BOND Type FS 2 has low flammability. It has a longer pot life and cures in approx. 1 hour (@ 20°C / 68ºF). Consistency: thixotropic; self levelling.

P-BOND is a new type of 2-component adhesive and is highly recommended where strong and durable elastic bonding is required. P-BOND is free of solvents and has excellent adhesion to various kinds of surfaces.

The 1.5 liter quantity is delivered in a combined pack containing both components. P-BOND FS 2 is has low flammability and is used in the ship building industry. The longer cure time of P-BOND Type FS 2 allows for large surface area applications.

Consumption approximately: 

Consumption depends on the thickness of the applied layer and on the texture of the surface. For smooth, even surfaces and when applied with a fine to medium serrated spatula:

0.75 to 1.00 litre per square meter.

or 25.36 to 33.81 fluid ounces per 10.76 square feet.

Contents: 1.5 Liter combined pack

Art. No:  NCP025

 P-BOND Composite Adhesive      Type FS 2       3 Liter 

P-BOND Type FS 2 has low flammability. It has a longer pot life and cures in approx. 1 hour (@ 20°C / 68ºF). Consistency: thixotropic; self levelling.

P-BOND is a new type of 2-component adhesive and is highly recommended where strong and durable elastic bonding is required. P-BOND is free of solvents and has excellent adhesion to various kinds of surfaces.

The 3 liter quantity is delivered in a combined pack containing both components. P-BOND FS 2 is has low flammability and is used in the ship building industry. The longer cure time of P-BOND Type FS2 allows for large surface area applications.

Consumption approximately: 

Consumption depends on the applied thickness of the layer and on the texture of the surface. For smooth, even surfaces and when applied with a fine to medium serrated spatula:

0.75 to 1.00 litre per square meter.

or 25.36 to 33.81 fluid ounces per 10.76 square feet.

Contents: 3 Liter combined pack

Art. No:  NCP026

 P-BOND Composite Adhesive        Type FS 2      15 Liter 

P-BOND Type FS 2 has low flammability. It has a longer pot life and cures in approx. 1 hour (@ 20°C / 68ºF). Consistency: thixotropic; self levelling.

P-BOND is a new type of 2-component adhesive and is highly recommended where strong and durable elastic bonding is required. P-BOND is free of solvents and has excellent adhesion to various kinds of surfaces.

The 15 liter quantity is delivered in a combined pack containing both components. P-BOND FS 2 is has low flammability and is used in the ship building industry. The longer cure time of P-BOND Type FS 2 allows for large surface area applications.

Consumption approximately: 

Consumption depends on the applied thickness of the layer and on the texture of the surface. For smooth, even surfaces and when applied with a fine to medium serrated spatula:

0.75 to 1.00 litre per square meter.

or 25.36 to 33.81 fluid ounces per 10.76 square feet.

Contents: 15 Liter combined pack

Art. No:  NCP027

 Replacement  mix nozzle            for 50 ml twin cartridge

Replacement graduated mixing nozzle for a P-BOND Composite Adhesive  50 ml twin cartridge.  

Since the mixing nozzle will not completely clear upon use, it is recommend that you order replacement nozzles for future applications.

Contents: 1 mix nozzle 

Art. No:  NCP120

 Replacement  mix nozzle          for 150 ml and 450 ml twin cartridge

Replacement graduated mixing nozzle for a P-BOND Composite Adhesive 150 ml and 450 ml twin cartridge.  

Since the mixing nozzle will not completely clear upon use, it is recommend that you order replacement nozzles for future applications.

Contents: 1 mix nozzle 

Art. No:  NCP130

 Adapter for common caulking gun            for 50 ml twin cartridge

Adapter for the usage of a 50 ml P-BOND Composite Adhesive cartridge with a common 310 ml caulking gun.

Contents: 1 adapter

Art. No:  NCP110

 Adapter for common caulking gun              for 150 ml twin cartridge

Adapter for the usage of a 150 ml P-BOND Composite Adhesive cartridge with a common 310 ml caulking gun.

Contents: 1 adapter

Art. No:  NCP150

FINE PRINT: The technical information and data presented herein is to the best of our knowledge and ability. Images may not fully represent products. Colors shown in this catalogue can differ from the true product colors. Since the products can be used in situations or in conditions over which we have no control or cannot foresee, this advice is not legally binding.  Furthermore, we reserve the right to make changes at any time to the product and to the technical information presented. Upon publication of revisions to this data or to product instructions, any existing technical data sheets are invalid. If you have any questions: please contact our technical department for additional information.